TTB-26
Massive, rigid 45° Slant Bed of Oil Lathe Construction
| Rigid Machine Structure ● The 45° slant bed is one-piece manufactured from high quality Meehanite cast iron, stress relieved. This results in maximum stability of structural material and deformation-free performance for years. ● The structure is analyzed by 3D Finite Element Analysis to achieve superior rigidity. ● Extra wide box ways on X, Z-axis are excellent for heavy duty cutting. The box ways are hardened and precision ground, contact slider coated with TURCITE-B. These box ways provide outstanding wear resistance and make the machine ideal for heavy duty cutting. |
| Hydraulic Turret |  |
| ● The hydraulic turret is driven by hydraulic servo indexing motor, which is combined with the use of high precision clutch for positioning. This design provides fast and accurate tool change. | |
| Spindle Gear Box |  |
| ● The rigid gearbox body combined with Japan imported gear, that are manufactured from Cr-Mo alloy steel, precision ground and carburization treated, These excellent gears provide high efficiency, low thermal growth and low noise transmission features. | |
| Rigid Spindle Headstock |  |
| ● The massive spindle headstock construction assures outstanding stability when performing heavy duty cutting. | |
| High Precision spindle | |
| ● The spindle runs in double row cylindrical roller bearing and high precision angular contact thrust bearings, providing superior axial and radial loading capability under heavy duty cutting conditions. | |
| Hydraulic 3-jaw Chuck |  |
| ● The hydraulic 3-jaw chuck is standard equipment. ● 3-jaw chuck diameter varies with the machine model 10"/12"/15"/18" to choose from. ● A foot switch is provided for controlling chuck clamping and unclamping, providing added convenience and efficiency. |
|
| Hydraulic Tailstock |  |
| ● The tailstock quill movement is actuated by hydraulic system for convenient work piece clamping. | |
| Programmable Tailstock (OPT.) |  |
| ● The tailstock movement can be controlled by programs to save manual operation and time, while upgrading efficiency of operation. | |
| Manual/Automatic Tool Length Measuring Device (OPT.) |  |
| ● The manual/automatic tool length measuring device is applied for convenient tool setting, wear compensation and breakage detection |
| Description | Unit | TTB-26 | |
|---|---|---|---|
| CONTROLLER | 0i-TD | ||
| CAPACITY | Swing over bed | mm | Ø515 |
| Swing over saddle | mm | Ø390 | |
| Max. turning diameter | mm | Ø390 | |
| Max. working length | mm | 530 | |
| Distance between centers | mm | 650 | |
| Bar capacity | mm | Ø75 | |
| Chuck size | inch | 10" | |
| Type of collet chuck | - | - | |
| STROKE | X-axis stroke | mm | 195+25 |
| Z-axis stroke | mm | 590 | |
| FEEDRATE | Axial rapid feedrate | m/min | X:16, Z:20 |
| Cutting feedrate (X/Z) | mm/min | 10000 | |
| SPINDLE | Spindle speed | 3500 | |
| Spindle nose | - | A2-8 | |
| Spindle taper | - | 1/20 | |
| Spindle bore diameter | mm | 87 | |
| TURRET | Turret type and storage capacity | - | Hydraulic 10/12 (opt.) |
| Square tool dimension | mm | 25x25 | |
| Boring tool dimension | mm | Ø40 | |
| Turret indexing time (T to T) | sec | 0.8 | |
| M-axis tool speed | rpm | - | |
| "M-axis tool motor output (cont/15 min)" | KW(HP) | - | |
| TAILSTOCK | Tailstock movement type | - | Manual/Programmable(opt.) |
| Tailstock body stroke | mm | 490 | |
| Quill movement type | - | Hydraulic | |
| Quill stroke | mm | 80 | |
| Quill diameter | mm | Ø85 | |
| Quill taper | - | MT. No.4 | |
| Max. quill thrust | kg | 288 | |
| MOTOR | "Spindle motor output (cont./30 min.)" | KW(HP) | 15(20)/18.5(25) |
| Axis servo motor | KW(HP) | X:3(4), Z:3(4) | |
| ACCURACY | X/Z axis positioning accuracy(VDI 3441) | mm | 0.01 |
| X/Z axis repeatability accuracy(VDI 3441) | mm | 0.006 | |
| HYDRAULIC SYSTEM | Hydraulic pump motor output | KW(HP) | 1.5 (2) |
| Hydraulic pressure | kg/cm²(PSI) | 35 (500) | |
| Hydraulic tank capacity | L | 50 | |
| COOLANT TANK | Coolant motor output | KW(HP) | 0.75 (1) |
| Coolant tank capacity | L | 210 | |
| Lub. tank capacity | L | 2 | |
| OTHER | Power requirements | KVA | 30 |
| Machine size (L×W×H) | mm | 3245x1750x2050 | |
| Machine weight | kg | 5000 |
| Machine Accessories | |
|---|---|
| Standard | Option |
| FANUC 0i-TD Control | Hollow Hydraulic 3-jaw Chuck 15"/18" |
| Hollow Hydraulic 3-jaw Chuck | Spindle Bore through 140mm w/15" Hydraulic Chuck |
| V10 Hydraulic Turret | Spindle Bore through 150mm w/18" Hydraulic Chuck |
| Hydraulic Tailstock | Spindle Bore through 165mm w/20" Hydraulic Chuck |
| Gear Box(TTB-36 Series) | V12 Hydraulic Turret |
| Foot Switch Control for Chuck | Programmable Tailstock |
| Coolant System | Front Air Blast |
| Automatic Lubrication System | Auto Door |
| 3-color Warning Lamp | Oil Mist Collector |
| Working Lamp | Bar Feeder Interface |
| Tool Box with Tools | Oil Skimmer |
| Chip Conveyor & Chip Cart | Manual/Auto Tool Presetter |
| Operation Manual | Transformer |
| Maintenance Manual | |
| Manual Guide 0i | |
| Auto Power OFF | |
| Dynamic Graph Simulation | |
| Rigid Tapping | |
| RS-232 Interface | |
| Memory Card Interface(PCMCIA) | |
| Ethernet | |
TL-180JM
TMT TL series CNC lathe features compact construction, small footprint and high efficiency. Outstanding rigidity and stability, combined with the use of automatic bar feeder enable the machine to achieve automatic operations that save labor costs and greatly increase turning efficiency.
● In addition, the TMT TL series is designed according to ergonomic engineering theorem for upgrading operational convenience. Parts collection is very convenient. Fully reflect the unique performance integrated in the TL series CNC lathe from TMT.
| High Rigidity Machine Structure |  |
| ● Box ways on both X and Z axes. The slide ways are harden and precision ground and scraped. ● The base is a rigid box type construction. It features vibration free during high speed, high accuracy cutting and heavy duty cutting. |
|
| High Speed, High Precision Spindle |  |
| ● The spindle runs in class P4 high precision angular contact ball bearings. The spindle is three points supported by bearings to increase spindle rigidity while minimizing thermal deformation. ● The specially designed spindle construction is not only suitable for high speed, high precision cutting, but also excellent for heavy duty cutting. |
|
| Coolant System |  |
| ● The coolant flowing through machine base is effectively cooled down and reduces temperature of the coolant. | |
| High Precision Servo Turret |  |
| ● The servo turret driven by a high speed servomotor. It's combined with high precision gear transmission to perform fast tool change. ● Adjacent tool index can be accomplished in only about 0.1 to 0.2 seconds. |
|
| Precision I.D. and O.D. Tool Holder |  |
| ● The highly rigid O.D. tool holders thoroughly eliminate tool vibration during cutting. ● The I.D. tool holders are bored on the machine and run-out to the spindle center is controlled in 5µm. ● Deviations of drilling and I.D. machining are kept at a minimum. |
|
| Parts Catcher |  |
| ● The parts catcher is designed by using the mechanical synchronization principle. Once parts are finished and cut off, the parts catcher collects the finished products fast and efficiently. | |
| Product Conveyor |  |
| ● By equipping with bar feeder and product conveyor, the CNC lathe provides a fully automatic operation system. |
| Description | Unit | TL-180JM | |
|---|---|---|---|
| CONTROLLER | 0i-TD | ||
| CAPACITY | Swing over bed | mm | Ø560 |
| Swing over saddle | mm | Ø210 | |
| Max. turning diameter | mm | Ø160 | |
| Max. working length | mm | 225 | |
| Distance between centers | mm | - | |
| Bar capacity | mm | Ø52 | |
| Chuck size | inch | 8" | |
| Type of collet chuck | - | 3 jaw chuck | |
| STROKE | X-axis stroke | mm | 132 (80+52) |
| Z-axis stroke | mm | 225 | |
| FEEDRATE | Axial rapid feedrate | m/min | X:18, Z:20 |
| Cutting feedrate (X/Z) | mm/min | 10000 | |
| SPINDLE | Spindle speed | 4200 | |
| Spindle nose | - | A2-6 | |
| Spindle taper | - | 1/20 | |
| Spindle bore diameter | mm | Ø66 | |
| TURRET | Turret type and storage capacity | - | Power turret VDI 20 / V12 |
| Square tool dimension | mm | 16x16 | |
| Boring tool dimension | mm | Ø20 | |
| Turret indexing time (T to T) | sec | 0.15/0.72 | |
| M-axis tool speed | rpm | 5000 | |
| "M-axis tool motor output (cont/15 min)" | KW(HP) | 1.1/3.7 | |
| TAILSTOCK | Tailstock movement type | - | Hydraulic |
| Tailstock body stroke | mm | - | |
| Quill movement type | - | - | |
| Quill stroke | mm | - | |
| Quill diameter | mm | - | |
| Quill taper | - | - | |
| Max. quill thrust | kg | 120 | |
| MOTOR | "Spindle motor output (cont./30 min.)" | KW(HP) | 5.5/7.5 |
| Axis servo motor | KW(HP) | X:1.6, Z:1.6 | |
| ACCURACY | X/Z axis positioning accuracy(VDI 3441) | mm | 0.01 |
| X/Z axis repeatability accuracy(VDI 3441) | mm | 0.006 | |
| HYDRAULIC SYSTEM | Hydraulic pump motor output | KW(HP) | 1.5 (2) |
| Hydraulic pressure | kg/cm²(PSI) | 40 (560) | |
| Hydraulic tank capacity | L | 158 | |
| COOLANT TANK | Coolant motor output | KW(HP) | 0.75 (1) |
| Coolant tank capacity | L | 158 | |
| Lub. tank capacity | L | 2 | |
| OTHER | Power requirements | KVA | 20 |
| Machine size (L×W×H) | mm | 2085x1360x1545 | |
| Machine weight | kg | 2600 |
| Machine Accessories | |
|---|---|
| Standard | Option |
| FANUC 0i Mate TD/0i-TD Control | Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-42/TL-52) |
| Collet Chuck 173E-Ø42/185E-Ø60(TL-42/52) | Collet Chuck(TL-160J/TL-180J) |
| Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-160J/TL-180J) | Manual Hydraulic Tailstock |
| Hydraulic V8 Turret/VDI Turret | Foot Switch Control for Chuck(TL-42/TL-52) |
| Foot Switch Control for Chuck(TL-160J/TL-180J) | Parts Catcher(TL-160J/TL-180J) |
| Parts Catcher(TL-42/TL-52) | Product Conveyor(TL-160J/TL-180J) |
| Product Conveyor(TL-42/TL-52) | Auto Door |
| Coolant System | Oil Mist Collector |
| Automatic Lubrication System | High Pressure Cutting Coolant Motor |
| 3-color Warning Lamp | Bar Feeder |
| Working Lamp | Oil Skimmer |
| Front Air Blast | Transformer |
| Tool Box with Tools | |
| Chip Conveyor & Chip Cart | |
| Operation Manual | |
| Maintenance Manual | |
| Manual Guide 0i | |
| Auto Power OFF | |
| Bar Feeder Interface | |
| Dynamic Graph Simulation | |
| Rigid Tapping | |
| RS-232 Interface | |
| Memory Card Interface(PCMCIA) | |
| Ethernet | |
TL-180J
TMT TL series CNC lathe features compact construction, small footprint and high efficiency. Outstanding rigidity and stability, combined with the use of automatic bar feeder enable the machine to achieve automatic operations that save labor costs and greatly increase turning efficiency.
● In addition, the TMT TL series is designed according to ergonomic engineering theorem for upgrading operational convenience. Parts collection is very convenient. Fully reflect the unique performance integrated in the TL series CNC lathe from TMT.
| High Rigidity Machine Structure |  |
| ● Box ways on both X and Z axes. The slide ways are harden and precision ground and scraped. ● The base is a rigid box type construction. It features vibration free during high speed, high accuracy cutting and heavy duty cutting. |
|
| High Speed, High Precision Spindle |  |
| ● The spindle runs in class P4 high precision angular contact ball bearings. The spindle is three points supported by bearings to increase spindle rigidity while minimizing thermal deformation. ● The specially designed spindle construction is not only suitable for high speed, high precision cutting, but also excellent for heavy duty cutting. |
|
| Coolant System |  |
| ● The coolant flowing through machine base is effectively cooled down and reduces temperature of the coolant. | |
| High Precision Servo Turret |  |
| ● The servo turret driven by a high speed servomotor. It's combined with high precision gear transmission to perform fast tool change. ● Adjacent tool index can be accomplished in only about 0.1 to 0.2 seconds. |
|
| Precision I.D. and O.D. Tool Holder |  |
| ● The highly rigid O.D. tool holders thoroughly eliminate tool vibration during cutting. ● The I.D. tool holders are bored on the machine and run-out to the spindle center is controlled in 5µm. ● Deviations of drilling and I.D. machining are kept at a minimum. |
|
| Parts Catcher |  |
| ● The parts catcher is designed by using the mechanical synchronization principle. Once parts are finished and cut off, the parts catcher collects the finished products fast and efficiently. | |
| Product Conveyor |  |
| ● By equipping with bar feeder and product conveyor, the CNC lathe provides a fully automatic operation system. |
| Description | Unit | TL-180J | |
|---|---|---|---|
| CONTROLLER | 0i-Mate-TD | ||
| CAPACITY | Swing over bed | mm | Ø560 |
| Swing over saddle | mm | Ø210 | |
| Max. turning diameter | mm | Ø200 | |
| Max. working length | mm | 220 | |
| Distance between centers | mm | 277.5 | |
| Bar capacity | mm | Ø52 | |
| Chuck size | inch | 8" | |
| Type of collet chuck | - | 3 jaw chuck | |
| STROKE | X-axis stroke | mm | 115 (100+15) |
| Z-axis stroke | mm | 220 | |
| FEEDRATE | Axial rapid feedrate | m/min | X:18, Z:20 |
| Cutting feedrate (X/Z) | mm/min | 10000 | |
| SPINDLE | Spindle speed | 4200 | |
| Spindle nose | - | A2-6 | |
| Spindle taper | - | 1/20 | |
| Spindle bore diameter | mm | Ø66 | |
| TURRET | Turret type and storage capacity | - | Wedge type V8 |
| Square tool dimension | mm | 20x20 | |
| Boring tool dimension | mm | Ø25 | |
| Turret indexing time (T to T) | sec | 1 | |
| M-axis tool speed | rpm | - | |
| "M-axis tool motor output (cont/15 min)" | KW(HP) | - | |
| TAILSTOCK | Tailstock movement type | - | Hydraulic |
| Tailstock body stroke | mm | 170 | |
| Quill movement type | - | - | |
| Quill stroke | mm | 177 | |
| Quill diameter | mm | Ø30 | |
| Quill taper | - | MT NO.2 | |
| Max. quill thrust | kg | 120 | |
| MOTOR | "Spindle motor output (cont./30 min.)" | KW(HP) | 5.5/7.5 |
| Axis servo motor | KW(HP) | X:1.2, Z:1.2 | |
| ACCURACY | X/Z axis positioning accuracy(VDI 3441) | mm | 0.01 |
| X/Z axis repeatability accuracy(VDI 3441) | mm | 0.006 | |
| HYDRAULIC SYSTEM | Hydraulic pump motor output | KW(HP) | 1.5 (2) |
| Hydraulic pressure | kg/cm²(PSI) | 40 (560) | |
| Hydraulic tank capacity | L | 158 | |
| COOLANT TANK | Coolant motor output | KW(HP) | 0.75 (1) |
| Coolant tank capacity | L | 158 | |
| Lub. tank capacity | L | 2 | |
| OTHER | Power requirements | KVA | 15 |
| Machine size (L×W×H) | mm | 2085x1360x1545 | |
| Machine weight | kg | 2550 |
| Machine Accessories | |
|---|---|
| Standard | Option |
| FANUC 0i Mate TD/0i-TD Control | Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-42/TL-52) |
| Collet Chuck 173E-Ø42/185E-Ø60(TL-42/52) | Collet Chuck(TL-160J/TL-180J) |
| Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-160J/TL-180J) | Manual Hydraulic Tailstock |
| Hydraulic V8 Turret/VDI Turret | Foot Switch Control for Chuck(TL-42/TL-52) |
| Foot Switch Control for Chuck(TL-160J/TL-180J) | Parts Catcher(TL-160J/TL-180J) |
| Parts Catcher(TL-42/TL-52) | Product Conveyor(TL-160J/TL-180J) |
| Product Conveyor(TL-42/TL-52) | Auto Door |
| Coolant System | Oil Mist Collector |
| Automatic Lubrication System | High Pressure Cutting Coolant Motor |
| 3-color Warning Lamp | Bar Feeder |
| Working Lamp | Oil Skimmer |
| Front Air Blast | Transformer |
| Tool Box with Tools | |
| Chip Conveyor & Chip Cart | |
| Operation Manual | |
| Maintenance Manual | |
| Manual Guide 0i | |
| Auto Power OFF | |
| Bar Feeder Interface | |
| Dynamic Graph Simulation | |
| Rigid Tapping | |
| RS-232 Interface | |
| Memory Card Interface(PCMCIA) | |
| Ethernet | |
TL-160JM
TMT TL series CNC lathe features compact construction, small footprint and high efficiency. Outstanding rigidity and stability, combined with the use of automatic bar feeder enable the machine to achieve automatic operations that save labor costs and greatly increase turning efficiency.
● In addition, the TMT TL series is designed according to ergonomic engineering theorem for upgrading operational convenience. Parts collection is very convenient. Fully reflect the unique performance integrated in the TL series CNC lathe from TMT.
| High Rigidity Machine Structure |  |
| ● Box ways on both X and Z axes. The slide ways are harden and precision ground and scraped. ● The base is a rigid box type construction. It features vibration free during high speed, high accuracy cutting and heavy duty cutting. |
|
| High Speed, High Precision Spindle |  |
| ● The spindle runs in class P4 high precision angular contact ball bearings. The spindle is three points supported by bearings to increase spindle rigidity while minimizing thermal deformation. ● The specially designed spindle construction is not only suitable for high speed, high precision cutting, but also excellent for heavy duty cutting. |
|
| Coolant System |  |
| ● The coolant flowing through machine base is effectively cooled down and reduces temperature of the coolant. | |
| High Precision Servo Turret |  |
| ● The servo turret driven by a high speed servomotor. It's combined with high precision gear transmission to perform fast tool change. ● Adjacent tool index can be accomplished in only about 0.1 to 0.2 seconds. |
|
| Precision I.D. and O.D. Tool Holder |  |
| ● The highly rigid O.D. tool holders thoroughly eliminate tool vibration during cutting. ● The I.D. tool holders are bored on the machine and run-out to the spindle center is controlled in 5µm. ● Deviations of drilling and I.D. machining are kept at a minimum. |
|
| Parts Catcher |  |
| ● The parts catcher is designed by using the mechanical synchronization principle. Once parts are finished and cut off, the parts catcher collects the finished products fast and efficiently. | |
| Product Conveyor |  |
| ● By equipping with bar feeder and product conveyor, the CNC lathe provides a fully automatic operation system. |
| Description | Unit | TL-160JM | |
|---|---|---|---|
| CONTROLLER | 0i-TD | ||
| CAPACITY | Swing over bed | mm | Ø560 |
| Swing over saddle | mm | Ø210 | |
| Max. turning diameter | mm | Ø160 | |
| Max. working length | mm | 220 | |
| Distance between centers | mm | - | |
| Bar capacity | mm | Ø42 | |
| Chuck size | inch | 6" | |
| Type of collet chuck | - | 3 jaw chuck | |
| STROKE | X-axis stroke | mm | 125(80+45) |
| Z-axis stroke | mm | 230 | |
| FEEDRATE | Axial rapid feedrate | m/min | X:18, Z:20 |
| Cutting feedrate (X/Z) | mm/min | 10000 | |
| SPINDLE | Spindle speed | 4500 | |
| Spindle nose | - | A2-5 | |
| Spindle taper | - | 1/20 | |
| Spindle bore diameter | mm | Ø55 | |
| TURRET | Turret type and storage capacity | - | Power turret VDI 20 / V12 |
| Square tool dimension | mm | 16x16 | |
| Boring tool dimension | mm | Ø20 | |
| Turret indexing time (T to T) | sec | 0.15/0.72 | |
| M-axis tool speed | rpm | 5000 | |
| "M-axis tool motor output (cont/15 min)" | KW(HP) | 1.1/3.7 | |
| TAILSTOCK | Tailstock movement type | - | Hydraulic |
| Tailstock body stroke | mm | - | |
| Quill movement type | - | - | |
| Quill stroke | mm | - | |
| Quill diameter | mm | - | |
| Quill taper | - | - | |
| Max. quill thrust | kg | 120 | |
| MOTOR | "Spindle motor output (cont./30 min.)" | KW(HP) | 5.5/7.5 |
| Axis servo motor | KW(HP) | X:1.6, Z:1.6 | |
| ACCURACY | X/Z axis positioning accuracy(VDI 3441) | mm | 0.01 |
| X/Z axis repeatability accuracy(VDI 3441) | mm | 0.006 | |
| HYDRAULIC SYSTEM | Hydraulic pump motor output | KW(HP) | 1.5 (2) |
| Hydraulic pressure | kg/cm²(PSI) | 40 (560) | |
| Hydraulic tank capacity | L | 158 | |
| COOLANT TANK | Coolant motor output | KW(HP) | 0.75 (1) |
| Coolant tank capacity | L | 158 | |
| Lub. tank capacity | L | 2 | |
| OTHER | Power requirements | KVA | 20 |
| Machine size (L×W×H) | mm | 2085x1360x1545 | |
| Machine weight | kg | 2550 |
| Machine Accessories | |
|---|---|
| Standard | Option |
| FANUC 0i Mate TD/0i-TD Control | Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-42/TL-52) |
| Collet Chuck 173E-Ø42/185E-Ø60(TL-42/52) | Collet Chuck(TL-160J/TL-180J) |
| Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-160J/TL-180J) | Manual Hydraulic Tailstock |
| Hydraulic V8 Turret/VDI Turret | Foot Switch Control for Chuck(TL-42/TL-52) |
| Foot Switch Control for Chuck(TL-160J/TL-180J) | Parts Catcher(TL-160J/TL-180J) |
| Parts Catcher(TL-42/TL-52) | Product Conveyor(TL-160J/TL-180J) |
| Product Conveyor(TL-42/TL-52) | Auto Door |
| Coolant System | Oil Mist Collector |
| Automatic Lubrication System | High Pressure Cutting Coolant Motor |
| 3-color Warning Lamp | Bar Feeder |
| Working Lamp | Oil Skimmer |
| Front Air Blast | Transformer |
| Tool Box with Tools | |
| Chip Conveyor & Chip Cart | |
| Operation Manual | |
| Maintenance Manual | |
| Manual Guide 0i | |
| Auto Power OFF | |
| Bar Feeder Interface | |
| Dynamic Graph Simulation | |
| Rigid Tapping | |
| RS-232 Interface | |
| Memory Card Interface(PCMCIA) | |
| Ethernet | |
TL-160J
|
● TMT TL series CNC lathe features compact construction, small footprint and high efficiency. Outstanding rigidity and stability, combined with the use of automatic bar feeder enable the machine to achieve automatic operations that save labor costs and greatly increase turning efficiency.
|
| High Rigidity Machine Structure |  |
| ● Box ways on both X and Z axes. The slide ways are harden and precision ground and scraped. ● The base is a rigid box type construction. It features vibration free during high speed, high accuracy cutting and heavy duty cutting. |
|
| High Speed, High Precision Spindle |  |
| ● The spindle runs in class P4 high precision angular contact ball bearings. The spindle is three points supported by bearings to increase spindle rigidity while minimizing thermal deformation. ● The specially designed spindle construction is not only suitable for high speed, high precision cutting, but also excellent for heavy duty cutting. |
|
| Coolant System |  |
| ● The coolant flowing through machine base is effectively cooled down and reduces temperature of the coolant. | |
| High Precision Servo Turret |  |
| ● The servo turret driven by a high speed servomotor. It's combined with high precision gear transmission to perform fast tool change. ● Adjacent tool index can be accomplished in only about 0.1 to 0.2 seconds. |
|
| Precision I.D. and O.D. Tool Holder |  |
| ● The highly rigid O.D. tool holders thoroughly eliminate tool vibration during cutting. ● The I.D. tool holders are bored on the machine and run-out to the spindle center is controlled in 5µm. ● Deviations of drilling and I.D. machining are kept at a minimum. |
|
| Parts Catcher |  |
| ● The parts catcher is designed by using the mechanical synchronization principle. Once parts are finished and cut off, the parts catcher collects the finished products fast and efficiently. | |
| Product Conveyor |  |
| ● By equipping with bar feeder and product conveyor, the CNC lathe provides a fully automatic operation system. |
| Description | Unit | TL-160J | |
|---|---|---|---|
| CONTROLLER | 0i-Mate-TD | ||
| CAPACITY | Swing over bed | mm | Ø560 |
| Swing over saddle | mm | Ø210 | |
| Max. turning diameter | mm | Ø200 | |
| Max. working length | mm | 220 | |
| Distance between centers | mm | 304 | |
| Bar capacity | mm | Ø42 | |
| Chuck size | inch | 6" | |
| Type of collet chuck | - | 3 jaw chuck | |
| STROKE | X-axis stroke | mm | 115(100+15) |
| Z-axis stroke | mm | 230 | |
| FEEDRATE | Axial rapid feedrate | m/min | X:18, Z:20 |
| Cutting feedrate (X/Z) | mm/min | 10000 | |
| SPINDLE | Spindle speed | 4500 | |
| Spindle nose | - | A2-5 | |
| Spindle taper | - | 1/20 | |
| Spindle bore diameter | mm | Ø55 | |
| TURRET | Turret type and storage capacity | - | Wedge type V8 |
| Square tool dimension | mm | 20x20 | |
| Boring tool dimension | mm | Ø25 | |
| Turret indexing time (T to T) | sec | 1 | |
| M-axis tool speed | rpm | - | |
| "M-axis tool motor output (cont/15 min)" | KW(HP) | - | |
| TAILSTOCK | Tailstock movement type | - | Hydraulic |
| Tailstock body stroke | mm | 170 | |
| Quill movement type | - | - | |
| Quill stroke | mm | 177 | |
| Quill diameter | mm | Ø30 | |
| Quill taper | - | MT NO.2 | |
| Max. quill thrust | kg | 120 | |
| MOTOR | "Spindle motor output (cont./30 min.)" | KW(HP) | 5.5/7.5 |
| Axis servo motor | KW(HP) | X:1.2, Z:1.2 | |
| ACCURACY | X/Z axis positioning accuracy(VDI 3441) | mm | 0.01 |
| X/Z axis repeatability accuracy(VDI 3441) | mm | 0.006 | |
| HYDRAULIC SYSTEM | Hydraulic pump motor output | KW(HP) | 1.5 (2) |
| Hydraulic pressure | kg/cm²(PSI) | 40 (560) | |
| Hydraulic tank capacity | L | 158 | |
| COOLANT TANK | Coolant motor output | KW(HP) | 0.75(1) |
| Coolant tank capacity | L | 158 | |
| Lub. tank capacity | L | 2 | |
| OTHER | Power requirements | KVA | 15 |
| Machine size (L×W×H) | mm | 2085x1360x1545 | |
| Machine weight | kg | 2500 |
| Machine Accessories | |
|---|---|
| Standard | Option |
| FANUC 0i Mate TD/0i-TD Control | Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-42/TL-52) |
| Collet Chuck 173E-Ø42/185E-Ø60(TL-42/52) | Collet Chuck(TL-160J/TL-180J) |
| Hollow Hydraulic 3-jaw Chuck 6"/8"(TL-160J/TL-180J) | Manual Hydraulic Tailstock |
| Hydraulic V8 Turret/VDI Turret | Foot Switch Control for Chuck(TL-42/TL-52) |
| Foot Switch Control for Chuck(TL-160J/TL-180J) | Parts Catcher(TL-160J/TL-180J) |
| Parts Catcher(TL-42/TL-52) | Product Conveyor(TL-160J/TL-180J) |
| Product Conveyor(TL-42/TL-52) | Auto Door |
| Coolant System | Oil Mist Collector |
| Automatic Lubrication System | High Pressure Cutting Coolant Motor |
| 3-color Warning Lamp | Bar Feeder |
| Working Lamp | Oil Skimmer |
| Front Air Blast | Transformer |
| Tool Box with Tools | |
| Chip Conveyor & Chip Cart | |
| Operation Manual | |
| Maintenance Manual | |
| Manual Guide 0i | |
| Auto Power OFF | |
| Bar Feeder Interface | |
| Dynamic Graph Simulation | |
| Rigid Tapping | |
| RS-232 Interface | |
| Memory Card Interface(PCMCIA) | |
| Ethernet | |